/ / / /
 

TECH: Rebellion hub

(click the images to enlarge)
(click the part numbers below in bold to purchase)

1. Hub shell
2. CrMo axle (M14x1 female) | #S2400
3. 6902 sealed bearing | #S2909
4. Aluminum Lock nut | #S2910
5. CrMo STLN axle bolt (3/8"x24tpi) | #S499
Rebellion Front Hub: 36h only
Flange Diameter: 47mm
Spoke Hole Diameter: 2.8mm
Flange Offset: 19mm

Notes: To remove the axle from the hub remove all hardware from one side completely to leave only the sealed bearing. The axle can be taken out at this point by tapping the same end with a rubber mallet causing it to exit from the the other side of the hub.





 
Copyright © 2004
www.StolenBMX.com